Playing Discs - Sony DVP-NC675P Service Manual

DVP-NC675P
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 ( through ). Each of these is the
B D
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 64 for using the Setup Display.
Audio Connection (pages 21 to 24)
A
• No additional settings are needed.
C-1
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 69).
• If the sound distorts even when the volume
is turned down, set "AUDIO ATT" to "ON"
(page 68).
B-2 C-2 D
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 69).
• Set "DIGITAL OUT" to "ON" (page 69).
Additional operations
DISC SELECT
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
DISC SKIP
To Operation
Select a disc Press DISC SELECT
DISC 1–DISC 5 on
the player
Stop Press x
Press X
Pause
Press X or H
Resume play after
pause
Go to the next disc Press DISC SKIP
Go to the next chapter, Press >
track, or scene in
continuous play mode
Go back to the Press .
previous chapter,
track, or scene in
continuous play mode
Stop play and remove Press Z
the disc
Replay the previous Press
scene* INSTANT REPLAY
during playback
27
To Operation
Briefly fast forward Press
the current scene** INSTANT
ADVANCE during
playback
Magnify the Press ZOOM
image*** repeatedly
Press CLEAR to
cancel
* For DVD VIDEOs and DVD-RWs/DVD-Rs
only.
** For DVD VIDEOs and DVD-RWs/DVD-Rs or
DVD+RWs only.
***For Video and JPEG pictures only (except
BACKGROUND pictures).
You can move the enlarged picture using
C/X/x/c. Depending upon the contents of the
disc, the Zoom function may be canceled
automatically when the picture is moved.
z Hints
• The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
• The Instant Advance function is useful when you
want to pass over a scene that you don't want to
watch.
• Before loading the discs, a disc number indicator
of an empty compartment may be lit.
Note
You may not be able to use the Instant Replay or
Instant Advance function with some scenes.
29
c

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
28
Replacing discs while playing a
disc (EXCHANGE)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
EXCHANGE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
1
Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn't stop playing.
2
Replace the discs in the
compartments with new ones.
3
Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.
4
Replace the discs in the
compartments with new ones.
5
Press EXCHANGE.
The disc tray closes.
z Hint
While the disc tray is open,
– If the playback of the current disc end, the player
stops playing. If the disc is played in One Disc
30
1-6
4
Press A on the player, and place a
disc on the disc tray.
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
Disc
compartment
With the playback
number
side facing down
DISC SKIP
5
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 32. For VIDEO CDs,
see page 33.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
(page 67).
Repeat Play mode (page 37), the current disc
starts playing again.
– In Shuffle Play mode (page 36), titles/tracks/
chapters are reshuffled only on the current disc.
– In Program Play mode (page 34), the titles/tracks/
chapters only on the current disc are played.
Note
Do not push the disc tray to close in Step 5, as you
DISC SKIP
may damage the player.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
on the front panel display.
The A and EXCHANGE buttons on the
player and the Z button on the remote do not
work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select "RESET" under "SETUP" in the
Control Menu (page 65), the disc tray remains
locked.