Service Note; Note On Removing The Upper Case; Disc Removal Procedure; Note On Removing The Table Ass'y - Sony DVP-NC675P Service Manual

1. NOTE ON REMOVING THE UPPER
CASE
1) Remove the two tapping screws and three screws. (See Fig. 1)
2) Open the sides of case. (See Fig. 1)
3) Remove the upper case in the direction of the arrow A.
(See Fig. 1)
Two tapping screws
Fig. 1.
2.

DISC REMOVAL PROCEDURE

1) Insert a flat-head (-) screwdriver into a hole at the bottom, and
rotate the cam gear in the direction of the arrow A. (See Fig.2)
Fig. 2.

SERVICE NOTE

Three screws +BV3 (3CR)
Two tapping screws
Cam gear
Hole
Table
A
— 5 —
3. NOTE ON REMOVING THE TABLE
ASS'Y
1) Remove the two screws. (See Fig. 3)
Screw
(M2.6 8)
Screw
(M2.6 8)
2) Remove the two Plates (guide) in the direction of the arrows
A and B. (See Fig. 4)
3) Remove the Table ass'y in the direction of the arrow C.
(See Fig. 4)
4) Remove the Flexible flat cable (See Fig. 4).
Table ass'y
C
B
Plate (guide)
DVP-NC675P
Fig. 3.
Flexible flat cable
(FMS-025: CN002)
Plate (guide)
A
Fig. 4.