Volume; System Q; Audio Setup - Kenwood KDC-MP8533 Instruction Manual

General features

System Q

Selecting the best sound setting preset for
different types of music.
1
Select the source to adjust
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "SYS.Q" is
displayed above the [1] button.
Refer to <Notes on Multi-function Key System>
(page 8).
3
Enter System Q mode
Press the [1] ("SYS.Q") button.
4
Select the Sound type
Push the Control knob towards [4] or
[¢].
Each time the knob is pushed, the setting
switches as shown below.
Sound setting
User memory
Rock
Pops
Easy
Top 40
Jazz
Natural
• User memory:
The values set on the <Audio Control> (page 10).
• Change each setting value with the <Speaker
Setting> (page 12).
First, select the speaker type with the Speaker setting.
10
|
English
Display
"USER"
"ROCK"
"POPS"
"EASY"
"TOP 40"
"JAZZ"
"NATURAL"
Audio Control
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item Display
Rear Volume * 1 "Rear Volume" 0 — 35
2,3
Subwoofer level* "Sub-W Level" –15 — +15
4
Bass level* "Bass Level"
4
Middle level* "Middle Level" –8 — +8
4
Treble level* "Treble Level"
Balance "Balance"
3
Fader* "Fader"
Exit Audio Control mode (Volume control mode)
• * 1 You can control this item when "2 ZONE" of <Audio
Setup> (page 12) is set to "ON".
2
• * You can control this item when <Subwoofer
Output> (page 12) is set to "SW ON".
3
• * You can control this item when "2 ZONE" of <Audio
Setup> (page 12) is set to "OFF".
• * 4 You can adjust these items in detail. Refer to
<Adjusting the detail of Audio Control>(Page 11).
• * 4 Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob, [ANG]
and [ATT] button.
Range
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15