Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna K650 Cut-n-break Operator's Manual

Symbols on the mac hine:
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
This product is in accordance with
applicable EC directives.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
Choke symbol
Stop symbol
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
2 –
English
KEY T O SYMBOLS
Symbols in the operator' s manual:
Switch off the engine b y moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Run position.
Choke lever in "closed position".
Choke lever in "open position".
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.