Blades - Husqvarna K650 Cut-n-break Operator's Manual

Blades

WARNING! Blades can break and cause
!
serious injuries to the user.
Never use blades other than original blades
designed for the machine.
Never use blades on a material other than
the one they are intended for.
WARNING! Cutting plastics with diamond
!
blades can cause kickback when the
material melts, due to the heat produced
when cutting, and sticks to the blades. Avoid
cutting plastics.
General
Only use special blades with integrated belt pulley halves on
this machine.
To obtain maximum cutting capacity and life use blades
designed for the material to be cut.
The blades should be marked with the same or a higher
speed than that stated on the machine's rating plate. Never
use blades at a lower speed rating than that of the power
cutter.
Ensure the blades are not cracked or damaged in any other
way. Replace blades if necessary.
High speed handheld machines
Only use special blades with integrated belt pulley halves on
this machine.
12 –
English
SAFETY INSTRUCTIONS