Parking Brake; Blade Switch; Ignition Switch - Husqvarna 996613403 Operator's Manual

Parking Brake

The parking brake is found on the left of the machine.
Pull the lever backward to activate the brake and
forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.

Blade Switch

To engage the mower deck, pull the blade switch
knob out. The mower blades are disengaged when
the knob is pressed down fully.

Ignition Switch

The ignition switch is placed on the control panel and
is used to start and stop the engine.
Push in and turn the key clockwise to start the engine.
On models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
CONTROLS
Parking brake
Blade switch
Ignition switch
8065-006
8065-084
8065-084
21