Download  Print this page

Table Of Contents; Contents; Note The Following Before Starting - Husqvarna J-handle set 335L X-series Operator's Manual

Hide thumbs

Advertisement

Contents

CONTENTS
Contents ......................................................................
Note the following before starting: ................................
What is what? ..............................................................
Cutting equipment ........................................................
General working instructions .......................................
Fitting the J-handle .....................................................
Adjusting the harness ..................................................
Assembling the cutting equipment ...............................
Fitting the guard extension ...........................................
cutter ............................................................................
Check before starting ...................................................
TECHNICAL DATA
Technical data ..............................................................

Note the following before starting:

Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
WARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! This accessory may only be used
!
together with the intended trimmer, see
under heading "Approved accessories" in
chapter Technical data in the machine's
Operator's Manual.
WARNING! Only grass blades/grass cutters
!
or trimmer heads/plastic blades may be used
when the J-handle is fitted. Saw blades must
never be used with the J-handle.
2 -
English
CONTENTS
IMPORTANT! The trimmer guard must be replaced with the
accompanying combination guard if a grass blade is fitted
to the machine.
2
2
IMPORTANT! Wear boots with steel toe-caps and non-slip
sole if a grass blade is fitted to the machine.
3
4
4
4
The J-handle set contains the following
6
parts:
6
1 J-handle
6
3 screws M5x16
6
1 combination guard
7
1 harness
1 grass blade
8
1 support cup
8
1 support flange
1 nut
1 socket spanner
1 transport guard

Advertisement

Table of Contents
loading

  Related Manuals for Husqvarna J-handle set 335L X-series