Faqs - Huawei HG630b User Manual

8 FAQs

Can I use the HG630b as a DHCP server?
Yes. The HG630b incorporates the DHCP server software.
How can I quickly restore the default settings of the HG630b?
When the HG630b is powered on, press and hold the Reset button
for 6 or more seconds, and then release it. The HG630b then
automatically restarts and the default settings are restored.
What can I do if I cannot access the HG630b configuration page?
Step 1 Check the IP address of your computer and ensure that this
IP address is in the same network segment as the HG630b
LAN IP address.
Step 2 Ensure that your Web browser does not use a proxy server.
Step 3 Ensure that you have entered the valid user name and
password used to access the HG630b configuration page.
If the problem persists, restore the default settings of the HG630b.
Does the WPS function have any special requirement on
the wireless encryption settings of the HG630b?
The WPS function can be used only when the WLAN security mode is
set to WPA2-PSK or WPA-PSK/WPA2-PSK. It is recommended
that you set the security mode to WPA-PSK/WPA2-PSK.
If my computer fails to connect to a WLAN after I press and hold the
WPS button, what should I do?
Step 1 Ensure that only one computer is connecting to the HG630b
through the WPS function at one time.
Step 2 On the HG630b, ensure that the wireless network function
and the WPS function implemented through the PBC
method are enabled.
43