8
Operating the appliance
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the necessary heat set-
ting. Change up or down, if it is necessary. Do not
release before you have a correct heat setting.
/
Switching the outer rings on and off
You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.
The Automatic heat up
The Automatic heat up function sets the
highest heat setting for some time, and
then decreases to the necessary level.
To start function touch the symbol
and than set the necessary heat setting.
comes on when the cooking zone oper-
ates on the highest heat setting.
To stop the function change the heat set-
ting.
Using the Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for one cooking
session.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
-
6 hours
5 hours
-
-
4 hours
/
. The indicator comes on. For
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
-
1.5 hours