Daikin BRC1E71 Operation Manual page 19

3
Cool
Set to
Cool
Return Setting
Cool / Heat Mode Selection Availability
● "Cool", "Heat" and "Auto" are all only available for selection on the cool/heat changeover master
indoor unit. The following table indicates the available operating modes of the other indoor units
on the system based upon the selected mode of the master indoor unit.
When the master indoor
unit is set to
Cool mode
Dry mode
Heat mode
Fan mode
Auto mode (Cooling operation)
Auto mode (Heating operation)
English
● Press the Mode button on the remote
controller of the indoor unit designated
74
as the cool/heat changeover master (the
F
remote controller not displaying the
icon) repeatedly until the desired
MASTER
CONTROLLED
mode is selected. The display will
change to "Fan", "Dry", "Auto", "Cool",
"Heat" each time the button is pressed.
● Simultaneously, the other indoor units on
the system will follow suit and change
modes to refl ect the new mode selected
at the changeover master remote
controller.
The other indoor units in the system can be set to
Cool Dry Heat Fan
17