Setting The Cool / Heat Changeover Master - Daikin BRC1E71 Operation Manual

Basic Operation

Setting the Cool / Heat Changeover Master

Setting Changes
1
Cool
Set to
Cool
Return Setting
MASTER
CONTROLLED
Cool
Set to
Cool
Return Setting
Selection Settings
The icon "
2
MASTER
CONTROLLED
Cool
Set to
Cool
Return Setting
Cool
Set to
Cool
Return Setting
16
See page 18 for an explanation of the cool/heat changeover master indoor unit.
● Press the Operation Mode Selector button
on the remote controller of the changeover
74
master indoor unit for at least four seconds.
F
(While the backlight is illuminated)
● The "
MASTER
CONTROLLED
indoor units connected to the same outdoor unit or
BS unit will start fl ashing.
74
F
* Vent mode setting changes are possible regardless of the cool/
heat changeover master indoor unit.
* If cool/heat mode is confi gured for control from the outdoor unit,
all remote controllers serving the associated indoor units will
display its "
● Set the cool/heat changeover master indoor unit as
outlined below.
" will flash on all remote controllers when the power is turned ON for the first time.
MASTER
CONTROLLED
● Press the Mode Selector button on the
remote controller of the indoor unit which
74
is to serve as the cool/heat changeover
F
master.
The remote controller for the changeover
master indoor unit is established and the
icon disappears.
MASTER
CONTROLLED
74
F Other remote controllers in the system
(indoor units served by the same outdoor
unit or indoor units served by the same
branch selector (BS) unit) will now display
the
MASTER
CONTROLLED
" icon on each remote controller for the
" icon.
MASTER
CONTROLLED
icon.
(VRV only)
English