Projecting images
Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using Remote Control
Using the Control Pad
Using the Control Panel
The input source changes in the following order.
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
If no image signal is being input, the following screen is displayed
when you press [Source Search] on the remote control or control
panel.
Change to Whiteboard when no image signal is being input.
47