Epson EB-1410Wi User Manual page 143

List of Functions
Sub-menu
Remote Receiver You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
User Button You can select the item in the Configuration menu to be assigned
to the [User] button on the remote control. By pressing
the [User] button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch settings/
adjustments. You can assign one of the following items to
the [User] button.
Power Consumption, Info, Progressive, Test Pattern,
Resolution, Pattern Display, and Auto Calibration
Function Sub-menu
Pattern Pattern Display: Display a pattern.
Pattern Type: You can select from Patterns 1 to 4 or User
Pattern. Patterns 1 to 4 display projection lines such as ruled lines
or a grid.
Pattern 1:
Pattern 3:
User Pattern: Captures a user pattern.
s "Saving User Pattern"
Test Pattern: When the projector is set up, a test pattern is
displayed so that you can adjust the projection status without
connecting equipment. While the test pattern is displayed, zoom,
focus adjustments, and keystone correction can be performed.
To cancel the Test Pattern, press the [Esc] button on the remote
control or the control panel.
Attention
If a pattern is displayed for a long time, a residual
image may be visible in projected images.
You can reset all adjustment values in the Settings menu to their
Reset
default settings, except for Zoom and User Button.
See the following to return all menu items to their default
settings.
s "Reset Menu"
Function
Pattern 2:
Pattern 4:
p.111
p.163
143