Frostmatic Function; High Temperature Alarm - AEG Electrolux S86348KG1 User Manual

The fridge temperature indicator shows the set temperature.
2. Press the OK button to confirm.
The COOLMATIC indicator is shown.
When the cooling is finished return the air lever (1) towards minimum.
To switch off the function:
1. Press the Mode button until the COOLMATIC indicator flashes.
2. Press the OK button to confirm.
3. The COOLMATIC indicator goes off.
The Quick Chill function stops automatically after approximately 6 hours.
The Quick Chill bottle holder can be removed if not used.

FROSTMATIC function

It is possible to place the fresh food to be frozen in all compartments except the lowest.
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
The FROSTMATIC indicator flashes.
The freezer temperature indicator shows
2. Press the OK button to confirm.
The FROSTMATIC indicator is shown.
An animation starts.
This function stops automatically after 52 hours.
To switch off the function before its automatic end:
1. Press the Mode button until the FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
3. The FROSTMATIC indicator goes off.
The function switches off by selecting a different freezer set temperature.

High temperature alarm

An increase in the temperature in the freezer compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator shows the highest temperature reached for a few
seconds. Then show again the set temperature.
4. The alarm indicator continue to flash until the normal conditions are restored.
When the alarm has returned the alarm indicator goes off.
Control panel
symbol.
9