Technical Specification; Permissible Water Pressure (To Ensure Reliable Function) - AEG Electrolux S92358-KA2 User Manual

The water dispenser lamp
and the yellow indicator
lamp flashes
Indicator lamp for the
water filter flashes.
The indicator lamp stays
on and shows yellow
Delivery is interrupted
after a short time

TECHNICAL SPECIFICATION

Model
Gross volume
Width
Height
Depth
Energy consumption kWh/y
Energy class
Rated power
Permissible water pressure
The total flow in the system can vary, depending on local water conditions
and/or water pressure.
Lowest permissible water
pressure. 2,5 bar (250kPa)
Highest permissible water
pressure. 5 bar (500kPa)
Do not connect the appliance in spaces where ambient temperature can
decrease to below freezing.
The appliance may only be connected to drinking water supplies.
The appliance may only be connected to cold water supplies.
Leakage at the water connection. Internal
leakage, please contact your local
Electrolux Service Force Centre.
The filter has been totally utilised. Replace
the filter.
80 % of the filter capacity expended. Buy a
new filter.
The maximum time of two minutes is
attained. Continue with delivery.
S 92358-KA2
324 l
595 mm
1800 mm
650
175 kwh/y
A
50W
(to ensure reliable function)
Consult your installer if water
pressure is less than 2,5 bar.
If water pressure exceeds 5
bar, than a reduction valve
must be fitted (available from
your specialist shop).
19
AEG/Electrolux 8184261-00/9
.