GE AS05 Series Owner's Manual & Installation Instructions page 17

4
Remove the Air Conditioner From the Case
Remove the 2 screws on each side of the case.
A
Keep these for later use.
5
Prepare the Case
Remove the backing from the top mounting
A
rail seal strip and attach it to the bottom of the
top mounting rail.
Slide the air conditioner from the case by
B
gripping the base pan handle and pulling
forward while bracing the case.
Remove packing cardboard and tape if present.
Install the top mounting rail with 3 type A
B
or 5 type A screws (as the installation requires)
from the inside of the case.
Top mounting rail
Insert the frames for the accordion panels into
C
the top and bottom mounting rails. Attach the
accordion panels to the side of the case using 6
type A screws.
Bottom mounting rail
17