Table of Contents
Advertisement
Window Installation Instructions for 6000, 8000, and 10,000 BTU Units
(models AS_06, AS_08, and AS_10)
Read completely, then follow step-by-step.
1
Window Requirements
These instructions are for a standard double-
hung window. You will need to modify them for
other types of windows.
The air conditioner can be installed without
the accordion panels if needed to fit in a narrow
window. See the window opening dimensions
below.
AS_06
and
AS_08
2
Storm Window Requirements
A storm window frame will not allow the air
conditioner to tilt towards the outside and will keep
it from draining properly. To adjust for this, attach
a piece of wood to the stool.
1/2" higher
than frame
Storm window
frame
3
Remove the Front Grille, if attached
To remove the grille:
Remove shipping tape if present.
A
On models with a slide out air filter, remove
it (see the Care and Cleaning section) and the
screw behind it (if present) that holds
the grille in place.
On models with a raise up inlet grille, lift it
(see the Care and Cleaning section) and
remove the screw behind it (if present) that
holds the grill in place.
Pull the grille with
B
your thumb while
pushing the case
with your fingers.
16
" min.
14
3
⁄
4
" to 37"
25
1
⁄
2
(With accordion panels)
" min.
20
1
⁄
2
(Without accordion panels)
Wood
Stool
All supporting parts must be secured to firm
wood, masonry or metal.
The electrical outlet must be within reach of the
power cord.
AS_10
27
5
⁄
(With accordion panels)
23
5
(Without accordion panels)
WOOD PIECES—
WIDTH: 2"
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place a
piece of wood on the stool to make it 1/2" higher
than the top of the storm window frame.
Attach securely with nails or screws provided by
the installer.
Push the grille
C
to the left and
raise it up.
NOTE: Do not pull the bottom edge toward you more
than 3 inches or you may damage the tabs of the grille.
" min.
16
1
⁄
8
" to 41"
8
" min.
⁄
8
Hide quick links:
Advertisement
Table of Contents
