Redial; View Numbers In The Redial List; Call A Number From The Redial List - AT&T EL52501 User Manual

Telephone operation

Redial

Each handset stores the 10 most recently called numbers in the redial list.

view numbers in the redial list

Press rEDIAL/
1.
2. Press rEDIAL/
repeatedly to scroll through the 10 most recently called
numbers (up to 30 digits each). The handset beeps twice
at the beginning or end of the list.
3. Press
OFF
note: If you access an empty redial list, the handset sounds an error tone.

Call a number from the redial list

• Follow Steps 1 and 2 above and when the number you
want to call is displayed, press
/spEAKEr to dial.
-Or-
1. Press pHONE/
a dial tone.
2. Press rEDIAL/
rEDIAL/
pAusE
to call is displayed.
3. Press /sELECT. The handset dials the desired number.
mENu
note: If you press rEDIAL/
handset sounds an error tone.
in idle mode.
pAusE
. Press
pAusE
/CANCEL to exit the redial list.
or
FLAsH
. Press
pAusE
repeatedly until the number you want
pAusE
, or rEDIAL/
DIr CID
pHONE/
FLAsH
/spEAKEr and then wait for
, or
DIr CID
when the redial list is empty, the
18
pAusE
REDIAL
or
888-722-7702