Changing The On-Screen Display; Marker Setup Screen; Virtual Surround - Marantz DV4500 User Manual

PLAYING A DISC

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1
Press the DISPLAY button
during playback to show the
current chapter.
• The elapsed and remaining
playing time of the current chapter will be displayed.
2
Press the DISPLAY button to show the current
title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press the DISPLAY button to show the BIT RATE
and the current repeat setting.
• If you are playing a dual layered
disc, the layer number will also
be displayed (L0: Layer 0 is
playing. L1: Layer 1 is playing).
• If you are playing a DVD-RW
with setting the PLAYLIST, the
following will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
4
Press the DISPLAY button to remove the display.
1
Press the DISPLAY button during playback, the
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button to show the total tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
3 Press the DISPLAY button to remove the display.
Hints for the On-Screen Display
• C - indicates Chapter repeat
• T - indicates Title or Track repeat
• A - indicates Disc repeat
• A B- indicates A-B repeat
DVD-V DVD-RW
9/49 0:00:00 -0:00:00
IIII
T L0
IIII
T ORG
CD VCD
– 22 –

Marker Setup Screen

DVD-V
Use markers to memorise your favourite places on a disc.
1 Press the SEARCH MODE but-
ton repeatedly until the display
screen and Markers appear dur-
ing playback.
2 Press the Cursor buttons
or B ) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that "_ : _ _ : _ _" appears in
the display.
3 When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
s or B button to choose the desired marker, then
press the ENTER button.
NOTES:
• Opening the disc tray or turning off the power or select
2
AC at step and press the ENTER button will erase
all Markers.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
5
Press the SEARCH MODE or RETURN button to
exit.

Virtual Surround

DVD-V DVD-RW
You can enjoy surround-sound effect over two speakers.
1 Press the MODE button during
playback.
2 Press the ENTER button to set it 1(Natural effect),
2(Emphasised effect) or OFF.
3 Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than "STEREO". (for Audio
CDs or Video CDs play only)
• The setting will be saved even if the player is turned off.
DVD-RW VCD
s
(
VCD CD
CD
MP3
WMA
EN