Changing The On-Screen Display; Marker Setup Screen; Virtual Surround - Marantz DV4400 User Manual

PLAYING A DISC

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button during
playback to show current Chapter.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
2 Press the DISPLAY button again
to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3 Press the DISPLAY button the
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
4 Press the DISPLAY button the fourth time to remove
the display.
1 Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show the Total
Tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
3 Press the DISPLAY button for the third time to
remove the display.
Hints for the On-Screen Display
• C - indicates Chapter repeat
• T - indicates Title or Track repeat
• G - indicates Group (folder) repeat
• A - indicates Disc repeat
• A B- indicates A-B repeat
DVD-V
Use markers to memorise
your favourite places on a disc.
9/49 0:00:00 -0:00:00
1 Press the SEARCH MODE
button four times (CD, VCD:
three times) during playback.
• The display screen and Markers
2 Press the s or B button to select 1, 2, 3, 4, 5, 6, 7,
8, 9, or 10 and ensure that "- : - - : - -" appears in the
display.
3 When reaches the desired point, press the ENTER
IIII T
button.
• The Title or Track and elapsed playing time will appear
4 To return to the Marker later, press the SEARCH
MODE button four times (CD, VCD: three times)
during playback and the s or B button to choose
the desired marker, then press the ENTER button.
NOTES:
• Opening the disc tray or turning off the power or select
CD VCD
• To clear a marker, using the s or B button, position
• You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN button to
exit.
You can enjoy stereophonic visual space on your existing 2
channel stereo system.
1 Press the MODE button during
playback.
2 Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
NOTE
• Select Virtual Surround OFF or adjust the volume down
– 22 –

Marker Setup Screen

DVD-V
will appear on the TV screen.
in the TV screen.
2
AC at step and press the ENTER button will erase
all Markers.
the cursor on to the marker number to be cleared and
press the CLEAR button.

Virtual Surround

DVD-V VCD
:
if the sound is distorted.
CD VCD
CD MP3 WMA
EN