GE GTR10 Owner's Manual And Installation Instructions page 10

Ge top-freezer refrigerators - owner's manual and installation instructions
Table of Contents

Advertisement

REVERSING THE DOOR SWING
2
REMOVE THE FRESH FOOD DOOR
Tape the door shut with masking tape.
Remove the center hinge and shim by removing
the screws (some models have lock washers with
each screw). Lift up the hinge to remove it.
NOTE: Some models have a washer between the
center hinge and the top of the fresh food door.
Do not lose.
Remove the tape holding the door shut.
Lift the fresh food door up and off the bottom
hinge.
Set the door outside-up on a non-scratching surface.
Make sure the butter bin does not swing open.
NOTE: When removing the door, watch for
washer(s) between the bottom hinge and the
bottom of the fresh food door that may stick to
the door. Do not lose.
CAUTION:
to the floor. To do so could damage the door stop.
Installation Instructions
Do not let door drop
(CONT.)
3
TRANSFER TOP HINGE TO
THE LEFT
Using a putty knife with the edge covered with
masking tape, remove the plug buttons. Be careful
of the paint finish.
Reinstall the plug button on the right side by
inserting it into the holes vacated by the top hinge
screws.
Reassemble the top hinge and shim on the left side,
turning the screws just enough to hold the hinge
in place.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtr12

Table of Contents