HP IPAQ H5100 User Manual page 34

To charge the iPAQ Pocket PC using the Universal Desktop
Cradle:
1. Plug the AC Adapter into an electrical outlet
the other end of the AC Adapter to the AC connector on the
Universal Desktop Cradle
2. Slide the bottom of your iPAQ Pocket PC into the cradle
and push firmly to seat it.
Ä
CAUTION: To avoid damaging your iPAQ Pocket PC or the cradle,
check to be sure the pins are aligned before pushing the Pocket PC
into the cradle.
✎
The amber charge light blinks while the battery is recharging and
turns solid (nonblinking) when the battery is fully charged.
There are stabilizers located in the Universal Desktop Cradle.
These stabilizers assist in aligning the unit when there is no
expansion pack attached. When you place your iPAQ Pocket PC
with an expansion pack attached into the Universal Desktop
User's Guide
Managing the Battery
and connect
.
3–6