Starting Vpn Server Connections; Setting Up Proxy Server Settings - HP IPAQ H5100 User Manual

11. To change advanced settings, tap the Advanced button.
✎
You will not need to change advanced settings unless:
■
The server to which you are connecting does not use
dynamically-assigned IP addresses and you need to enter
your TCP/IP settings,
or
■
You need to change server DNS or WINS settings.
12. Tap the Finish button.

Starting VPN Server Connections

To start a connection through a VPN server, be sure the WLAN is
powered on, then select the VPN network. Your iPAQ Pocket PC
will automatically begin connecting.

Setting Up Proxy Server Settings

If you are connected to your ISP or private network during
synchronization, your iPAQ Pocket PC should download proper
proxy settings from your personal computer. If these settings are
not on your personal computer or need to be changed, you will
need to set them up manually. To set up proxy server settings:
1. Contact your ISP or network administrator for the proxy
server name, server type, port, type of Socks protocol used,
and your user name and password.
2. Be sure the WLAN is powered on.
3. From the Today screen, tap Start > Settings > Connections
tab > Connections > Tasks tab.
4. Under My Work Network, tap Edit my proxy server >
Proxy Settings tab.
User's Guide
Using the Wireless LAN (h5500 only)
9–16