Ford Ranger Owner's Manual page 32

Note: Double locking is activated only when
all the passenger doors are closed and the
bonnet is closed in the vehicle fitted with
alarm.
WARNING
Do not activate double locking when
persons or animals are inside the
vehicle. You will not be able to
unlock the doors from inside if you have
double locked them.
Note: If the ignition is switched on with the
double locking function activated, the lock
will automatically return to single lock stage.
Double locking is a theft protection feature
that prevents someone from opening the
doors from the inside.
Note: The driver s door can be unlocked
with the key. This needs to be used if the
remote control is not functioning.
Note: If the vehicle remains locked for
several weeks, the remote control will be
disabled. The vehicle must be unlocked and
the engine started using the key. Unlocking
and starting the vehicle once will enable the
remote control.
Reprogramming the unlocking function
The unlocking function may be
reprogrammed so that only the driver s
door is unlocked. See Programming the
remote control (page 27).
Locking and unlocking confirmation
Note: When you lock the doors, the
direction indicators will flash once.
When you double lock the doors, the
direction indicators will flash twice.
When you unlock the doors the direction
indicators will flash one long flash.
Locks
Child play protection function
If the remote control buttons are pressed
continuously several times, the locking and
unlocking function will be blocked for a
while to avoid door latches from
overheating.
Locking and unlocking the doors
from inside
Press the button. For item
location. See At a Glance (page
9).
E131288
Driver configuration mode
Note: This operation has to be done within
30 seconds.
1. Ignition OFF to ON position.
2. Press central lock/unlock button 3
times.
3. Ignition ON to OFF position.
4. Press central lock/unlock button 3
times.
5. Ignition OFF to ON position.
The system will chirp to indicate that the
driver configuration mode is enabled.
Automatic locking by speed
Press the central lock/unlock button twice
within three seconds to toggle the
automatic locking by speed function. The
system will chirp when toggling.
Automatic unlocking
Note: Automatic unlock is default enabled.
Press the button three time within three
seconds to toggle the automatic unlocking
function.
If the automatic unlocking function is
enabled:
30