Ford Ranger Owner's Manual page 214

Note: After bonding a phone to the system,
this becomes the active phone.
1. Press the PHONE button.
2. Press the up/down buttons until
SELECT PHONE is shown.
3. Press the OK button.
4. Scroll through the different stored
phones by using the up/down buttons
to display the bonded phones.
5. Press the OK button to select the
phone which is to be the active phone.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE button.
2. Press the up/down buttons until
SELECT PHONE is shown.
3. Press the OK button.
4. Press the up/down buttons to highlight
the required phone.
5. Press function button 1.
Telephone
212