Hunter ceiling fan Installation Manual page 12

24
[a]
[c]
Loosely insert blade mounting screws [a] through the blade iron
[b] into the fan until all fan blades [c] are spaced and attached.
Securely tighten all screws.
26
[b]
Pull the upper plug connector [a] through the center of the upper
switch housing [b].
[b]
[a]
12
25
Partially thread two small assembly screws [a] into two of the three
outermost holes on the switch housing mounting plate [b].
27
[a]
Place the keyhole slots in the upper switch housing [a] over the
loosely threaded assembly screws [b] then rotate the switch
housing [a] counterclockwise until the screws are situated in the
narrow end of keyhole.
[a]
[b]
[b]