Hunter ceiling fan Installation Manual page 11

20
Raise the canopy over the ceiling plate. Rotate the canopy clockwise
until the tabs on the ceiling plate totally engage with the slots in the
canopy
22
If your fan includes grommets [a], place them in the fan blade holes
by hand.
[a]
[b]
21
Partially install the three canopy screws [a] into the canopy one at a
time. Once all three screws are in, tighten them.
Using both hands, push the canopy trim ring [b] up to the top of
the canopy. The canopy trim ring will snap and lock into place.
23
[b]
Attach the fan blade [a] to the blade iron [b] using three blade
assembly screws [c]. Repeat for all blades. Securely tighten all
screws.
11
[a]
[c]
[a]