Hunter ceiling fan Installation Manual page 10

[a]
17
[b]
[c]
If you have a separate switch for the light, connect that wire [a] to
the black and white wire [b] from the fan motor [c] by twisting the
ends together and securing with a wire nut.
If not, connect the black and white wire from the fan to the black
wires from the previous step.
18
If you are low profile mounting, skip this step. If you are standard or
angle mounting, rotate the pipe ball [a] in the canopy [b] so that
the tab on the canopy [b] sits in the groove of the pipe ball [a].
[b]
[a]
10
WARNING! Be sure no bare wire or wire strands are visible after making
connections. Failure to complete the following steps carefully could
result in the fan falling.
19
[a]
Align the slots in the canopy [a] with the tabs on the ceiling plate
[b].
[b]