Fisher & Paykel RB60V18 Installation Instructions And User Manual page 13

3. Placing the refrigerator into the cabinet
Pull the power cord through the hole at the back of the cabinet or if the power socket is inside
3a
the cabinet, plug in the refrigerator before installing it into the cabinet.
Take care not to kink or bend the power cord as a damaged cord is a fire risk.
■ ■
For safety reasons, only turn on the refrigerator once installation is complete.
■ ■
Move the refrigerator into the cabinet and adjust its position to ensure that the clearance
3b
adjustment plate is attached to the bottom end of the cupboard side panel and the door gasket
is attached to the front end of the cupboard side panel.
Make sure the left and right side clearances between the refrigerator and cabinet are the same.
3c
Fasten the side surfaces of the hinge with screws. Fix one screw to the top hinge and one screw
3d
to the bottom hinge. Then fix all other screws to the remaining hinges.
Installation instructions
Top view
cross section
Refrigerator door
Fig.6 Installation of cabinet
Fig.7 Fastening of hinge screws
Kitchen cabinet
End surface
of clearance
adjusting plate
Top attachment bracket
Front line of
side surface
11