Fisher & Paykel CI302DTB User Manual page 30

Using your cooktop's special features
28
If no pan is detected on one cooking zone:
The left hand display will still show the selected temperature and the right hand display will still
show .
If after 10 minutes no pan is detected:
the bridging function will switch off.
the cooking zone without a detectable pan will turn off.
the remaining cooking zone will continue cooking at the selected heat setting.
Using Automatic Cooking in bridged mode
Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.
1
Using the left hand setting selector, select the heat setting.
2
Hold your finger on the control at the selected heat setting until
3
selected setting.
To cancel bridging
At the same time, touch the setting selectors of both bridged cooking zones.
The bridging indicator lights will go out.
Note: Sliding the scale down to 0 will not turn off bridging.
Note: Cancelling bridging will also cancel the timer for those cooking zones.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See 'Setting the timer' .
The timer indicator will show in both displays.
A
flashes alternately with the