Backlight Mode - Honeywell HVC0001 Owner's Manual

Owner's Guide 400-305-000-EFS
Set the Backlight mode
The controller provides 3 backlight modes. Depending on the mode selected, when you do
not press any button, the screen behaves as follows:
• Scrn Off: The screen is not lit.
• Scrn On HI: The screen is lit at high intensity.
• Scrn On LO: The screen is lit at low intensity (default mode).
When you press any button, the screen is lit at high intensity for 8 seconds.
NOTE: Refer to the menu flowchart sheet on how to set the backlight mode.
8