HP 6100 Specification page 31

QuickSpecs
Configuration Information and Configuration Rules
EVA4100 Starter
Kit for HP BladeSystems
EVA4100 Starter
Kit for HP BladeSystems
Field Installed
Models
Enterprise Virtual Array
4100/6100/8100
Independent Bundles
EVA4100 2C1D
Model Independent
Bundle
EVA6100 2C4D
Model Independent
assembly with two HSV200-B controllers with redundant power supplies, one
M5314C 3U Dual-redundant FC loop 14-bay disk enclosure & appropriate mounting
rails, XCS 6.110 firmware, 8x 300 GB 10K rpm HDDs, Command View EVA
software and 4x1 TB Command View licenses, for licensing up to 4TBs, factory
integrated. This solution can scale up to 28TBs. Also includes 1x HP StorageWorks
4/8 Base SAN switch, 8x 4Gbs SFPs, 4x Storage Works LC/LC 15m Cables, 4x
Storage Works LC/LC 2m Cables, 4x HP StorageWorks FC2142 4Gb PCI-e HBA's,
and Starter Kit media including Command View EVA and Emulex EZPilot, HP MPIO
DSM, and HP VDS.
NOTE: This offering is supported for factory integration in the Americas and in Asia
Pacific. Field installation is available for Asia Pacific only.
NOTE: This SKU is unavailable in EMEA.
EVA4100 Starter Kit for HP BladeSystems is available with a 1 year 9x5 next day
business day warranty and bundled hardware and software solution. Includes one 4U
Controller assembly with two HSV200-B controllers with redundant power supplies,
one M5314C 3U Dual-redundant FC loop 14-bay disk enclosure & appropriate
mounting rails, and XCS 6.110 firmware. Command View EVA software and 4x1 TB
Command View licenses, for licensing up to 4TBs, factory integrated. This solution can
scale up to 28TBs. The EVA4100 Starter Kit for HP BladeSystems, does not come with
hard disk drives. For this reason, at least 8 EVA HDDS must be ordered with the
EVA4100 Starter Kit for HP BladeSystems.
NOTE: This offering is supported for factory integration and is available worldwide.
Field installation is available for Asia Pacific only. This SKU is not available in EMEA.
EVA4100 Starter Kit for HP BladeSystems is available with a 1 year 9x5 next day
business day warranty and bundled hardware and software solution. Includes one 4U
Controller assembly with two HSV200-B controllers with redundant power supplies,
one M5314CB 3U Dual-redundant FC loop 14-bay disk enclosure & appropriate
mounting rails, and XCS 6.110 firmware. Command View EVA software and 4x1 TB
Command View licenses, for licensing up to 4TBs. The EVA4100 Starter Kit for HP
BladeSystems does not come with hard disk drives. For this reason, at least 8 EVA hard
disk drives must be ordered with this Starter Kit. This kit is field integrated.
NOTE: This SKU is not available in EMEA.
The following models are available worldwide - each includes HW, varied storage
capability, and Foundation Service Solution Warranty of 2 years 24 x 7 4 hour
response, Installation and Startup service, 2 years of Virtual Controller Software (XCS)
phone-in support and updates, and automated event notification and remote problem
intervention. Factory Integration is required for all factory built models.
The EVA4100/6100/8100 Models are modular and scalable storage solutions
designed to have no-single-point-of-failure, which provide disaster tolerance and
business continuance support for storage consolidation on heterogeneous SANs.
Includes one 4U Controller assembly with two HSV200-B controllers, one M5314C
3U 14-bay disk drive enclosure, cables, and appropriate mounting hardware.
NOTE: A rack must be ordered with this selection.
Additional M5314C disk drive enclosures may be added to a maximum of four disk
drive enclosures (up to a 2C4D).
Multiple EVA4100s can be configured in a single cabinet.
Includes one 4U Controller assembly with two HSV200-B controllers, four M5314C
3U 14-bay disk drive enclosures, a dual loop switch option, cables, and appropriate
DA - 12745 Worldwide QuickSpecs — Version 5 — 2.26.2008
HP StorageWorks Enterprise Virtual Array Family
AG904A
AG903A
AD554C
AD556C
Page 31