HP 6100 Specification page 18

QuickSpecs
Product Highlights
Servers Supported –
Single and Clustered
EVA Required Software HP StorageWorks EVA4100/6100/8100 ships with XCS V6.110 factory installed on new EVAs. XCS
HP StorageWorks EVA
Software Selector
HP servers (HP-UX, ProLiant, AlphaServers)
X86 servers
Dell servers
Sun servers
IBM servers
Apple XsApple Servers (PowerPC and Intel)
V6.110 supports all 2 and 4Gb EVA4000/6000/8000 and EVA4100/6100/8100models The base
XCS License to use for the EVA is contained in the hardware shipment.
HP StorageWorks EVA4x00/6x00/8x00 XCS v6.110 controller media download is available from
HP.com. These downloads are available for upgrades of existing 2 and 4Gb EVA4x00/6x00/8x00s.
The EVA Release Notes and Upgrading Product software Guide are also available from the same
location.
NOTE: Review the Release Notes and Upgrading Product Software documentation and compatibility
requirements of all installed Array Integrated Software completely before upgrading. Downgrading an
EVA XCS version is not recommended without HP Service support. Contact HP Services if you have any
questions.
XCS V6.110 is available for download at the "software & drivers" link:
http://h18006.www1.hp.com/products/storageworks/eva/index.html
HP StorageWorks Command View EVA is required software for all EVA models. HP Command View EVA
requires a License to use (LTUs) equal to, or greater than the total raw capacity of each array.
NOTE: The minimum supported version of XCS on the EVA4100/6100/8100 is XCS V6.110
The following matrix will assist in identifying some of the complimentary HP software products can be
used along with the EVA to support various business applications. Please see your Sales Representative, or
go to http://www.hp.com/
Just click on the product name and you will be linked to the product specification URL.
DA - 12745 Worldwide QuickSpecs — Version 5 — 2.26.2008
HP StorageWorks Enterprise Virtual Array Family
for more information on these valuable HP software products.
Page 18