Aztech 200Mbps HomePlug AV Ethernet Adaptor User Manual page 8

User Manual
Label Label Label Label
A
Power Power Power Power
Powerline Activity Powerline Activity Powerline Activity Powerline Activity
B
C Ethernet Activity Ethernet Activity
Ethernet Activity Ethernet Activity
D Ethernet Port Ethernet Port Ethernet Port Ethernet Port
E Reset to Factory Default Reset to Factory Default
Reset to Factory Default Reset to Factory Default
F Simple Connect Simple Connect Simple Connect Simple Connect
Page 8 of 42
Status Status Status Status Description/ Function Description/ Function Description/ Function Description/ Function
Blinking When LED is blinking slowly in Green color HomePlug
slowly AV is on a Power Saving status.
Off No power.
•
On After Simple Connect is pressed for two
seconds, this LED will blink to confirm the
button press.
•
When Simple Connect is pressed for 10
seconds, this LED will blink to confirm the
Private Network Name reset.
Off Device is not connected to a HomePlug AV network.
•
On This LED remains on when the device is part of
a HomePlug AV network.
•
The LED colors represents the connection rate
within the HomePlug AV network whether it is
good (red), better (amber), or best (green).
•
The LED flashes to indicate network activity.
Off An Ethernet device is not connected.
•
On An Ethernet device is connected.
•
The LED flashes to indicate Ethernet activity.
Accepts either cross or straight Ethernet cable.
Press for 2 seconds to reset to the factory default
settings. When you reset to the factory default, all your
configuration changes will be removed.
Press to create or join a HomePlug AV network. It can
also be used to reset the Private Network Name to a
random key.