Extron electronics MLS 608 D Setup Manual page 7

Using the DSP Configurator
The MLS can be configured using the DSP Configurator software from the supplied DVD or downloaded from
To upload from the DVD:
Place the disc in the DVD drive and install the program onto a local PC that is connected to the MLS 608 D.
To download from the Extron website:
At the home page, click the Download tab and click Software (at left side of page).
1.
Navigate to the DSP Configurator file and click Download.
2.
3. Log in with your Extron website account. If you do not have one, contact the
Download the file and install it on the PC.
4.
To use the software, open the program and at the main window click Help, Contents (or press F1) and follow the instructions.
Basic Simple Instruction Set (SIS) Commands
The table below lists some basic SIS commands for the MLS 608 D. See the MLS 608 D User Guide for a complete SIS list.
Commands
Input selection — video and audio
Set program volume gain (dB) value
Examples:
Increment gain
Decrement gain
View master value
Set Mic volume gain (dB) value
Increment gain
Decrement gain
View master value
Turn power save mode off
Turn power save mode on
Query power save status
Reset all video and audio settings to
factory default
Reset all settings to factory default
Enable Executive mode 1
Enable Executive mode 2
Disable Executive mode
View Executive mode status
Mute HDMI audio output
Unmute HDMI audio output
View HDMI audio mute status
Mute overall volume output
Unmute overall volume output
View overall volume output status
X!
NOTE:
= Input connection,
X2*
= Incremental or decremental value in
X2(
= Master volume values, multiplied by 1
Software
™
ASCII command Response
(host to switcher) (switcher to host)
Chn X!]
X!!
Ed1*X2(GRPM} GrpmD01*X2(]
Ed1*0GRPM} GrpmD01*+00000]
GrpmD01*-00100]
Ed1*-100GRPM}
Ed1*-1000GRPM} GrpmD01*-01000]
E d1*X2*+GRPM} GrpmD01*X2(]
E d1*X2*-GRPM} GrpmD01*X2(]
E d1GRPM} X2(]
E d2*X2(GRPM} GrpmD02*X2(]
E d2*X2*+GRPM} GrpmD02*X2(]
E d2*X2*-GRPM} GrpmD02*X2(]
E d2GRPM} X2(]
E 0 PSAV} Psav0]
E 1 PSAV} Psav1]
E PSAV} 0 ] (or) 1 ]
E ZXXX} Zpx]
E ZQQQ} Zpq]
1X Exe1]
2X Exe2]
0X Exe0]
X 0 ] (or) 1 ]
(or) 2 ]
1Z Amt1 ]
0Z Amt0 ]
Z 0] (or) 1]
E D5*1GRPM} GrpmD05*1 ]
E D5*0GRPM} GrpmD05*0 ]
E D5 GRPM} +00000] (or) +00001]
0 – 8, 0 = no connection
0
.1 dB steps, multiply by 1
0
Extron S3 Sales and Technical Support Hotline.
Additional description
Select video and audio from inputs 0-8 source X! .
Set a program gain value to X2( .
Sets the program gain value to 0 dB.
Sets the program gain value to -10 dB.
Sets the program gain value to -100 dB.
Increase program volume.
Decrease program volume.
View the current program volume.
Set a microphone volume gain value to X2( .
Increase microphone volume.
Decrease microphone volume.
View the current microphone volume.
Turn power save mode off.
Turn power save mode on.
View the current status (0 = off [default], 1= on).
Resets all video and audio settings.
Resets all video and audio settings and protected
configuration settings.
Lock the front panel buttons and knobs.
Lock the front panel buttons only.
Unlock all the front panel.
View the current status:
0 = off [default]; 1 = on, lock all buttons and
knobs; 2 = on, lock input buttons only.
Mute HDMI audio output.
Unmute HDMI audio output.
View mute status (0 = mute off, 1 = mute on).
Mute overall volume output (1 = on).
Unmute overall volume output, (0 = off).
View mute status (+00000 = mute off,
+00001 = mute on).
0 0 0
(1 = 1. dB)
www.extron.com .
7