HP Proliant ML350 Quickspecs page 19

QuickSpecs
Configuration Information - Factory Integrated Models (North America only)
Hard Drive Cable
Modems
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory
integration. Please contact an HP sales representative for additional information.
HP Internal SAS/SATA Cable, 30 inch multi-lane
NOTE: The SAS cable above supports four drives. Two cables are required
when more than four drives are installed. These cables and HP Smart Array
P600 RAID controller are required to support Serial Attached SCSI (SAS) hard
drives. Refer to the ML350 G4p Cable Matrix for detailed information
(http://www.hp.com/servers/proliantML350).
Agere 2006 PCI Hi-Speed 56K Sof FIO
NOTE: This part number must be used for factory integration. For field
integration (or as an additional "ship along" option) choose EK694AA.
DA - 12199 Worldwide QuickSpecs — Version 29 — 11.14.2006
HP ProLiant ML350 Generation 4p
389662-B21
440519-B21
Page 19