D-Link DSL-2520U User Manual page 35

DSL-2520U ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Parameter
Dial on demand
MTU
PPP IP extension
Keep Alive
Use Static IP Address
PPP debug
PPPoE pass through
Interface
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify
a period of inactivity (in seconds) after which the connection should
be terminated.
The maximum size of units transmitted by the interface.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Select the checkbox if you want to use a static IP address to access
the Internet. In the IP Address field displayed when the checkbox
is selected, specify a static IP address.
Select the checkbox if you want to log
debugging.
Displayed for the PPPoE type only.
Select the checkbox if you want to allow PPPoE clients of
computers from your LAN to connect to the Internet through this
PPPoE connection of the router.
The name assigned to the connection by the system.
Page 35 of 67
Configuring via Web-based Interface
Description
keep you connected to
all data on PPP connection