PARTS AND CONTROLS
RECOIL
STARTER
GRIP
HANDLEBAR
ADJUST
(P. 3)
KNOB (2)
OIL FILLER CAP
(P. 4)
BLADE
CONTROL
(P. 8)
LEVER
CUTTING HEIGHT
ADJUSTMENT
(P. 6)
LEVER (4)
SPARK PLUG
(P. 13)
CAP
AIR FILTER
(P. 12)
CARBURETOR
FUEL VALVE ON
HANDLEBAR
(P. 9)
SHIFT LEVER
(P. 8)
THROTTLE LEVER
REAR
DISCHARGE
(P. 5)
GUARD
FUEL TANK CAP
(P. 7)
MUFFLER
(P. 13)
BLADE
CONTROL
BUTTON
DRIVE
CLUTCH
LEVER
(P. 8)
GRASS BAG
(P. 4)
CLIP DIRECTOR®
(P. 5)
KNOB
FUEL VALVE OFF
INITIAL MOWER SETUP
List of Parts
With help of an assistant, carefully remove the mower and loose parts
from the carton and compare the loose parts against the following list.
Contact the authorized Honda dealer from whom you purchased the
mower if any of the loose parts shown are not included with the
mower.
Ref. No.
Grass bag frame
Grass bag
Engine oil and owner's manual
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, raise
the handlebar into the mowing position.
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height.
4. Remove all the cardboard from around the handlebar.
Description
HANDLEBAR ADJUST
KNOBS
UNLOCKED
Qty.
1
1
1
LOCKED
3