Table of Contents
Advertisement
Main Menu
Table of Contents
Steering Wheel Adjustments
When you turn the ignition switch to
the LOCK (0) position and release it,
or remove the built-in key from the
ignition switch, the steering wheel
automatically moves fully in and up.
The steering wheel returns to its
original position when you push the
ignition switch or insert the built-in
key back in the ignition switch.
Steering wheel movement is also
controlled by the driving position
memory system (see page
To change the ''AUTO TILT &
TELESCOPIC'' setting, see page
.
103
144
If your vehicle's battery is
disconnected or goes dead, or the
fuse for the power tilt and telescopic
steering wheel is removed, the
power tilt and telescopic steering
wheel system needs to be reset
when you reconnect the battery or
install the fuse.
Push the ignition switch for more
than 1 second and release it, or
insert the built-in key into the
ignition switch, and remove it. The
156
).
steering wheel automatically moves
fully in and up to let you know the
system is reset.
Advertisement
Table of Contents
