Table of Contents
Advertisement
Main Menu
Table of Contents
Loading Discs in the Changer
To load multiple discs in one
operation:
With the ignition in the
1.
ACCESSORY (I) or the ON (II)
position, press and hold the LOAD
button until you hear a beep and
see ''LOAD'' in the upper display,
then release the button.
Insert a disc into the slot. Insert it
2.
only about halfway; the drive will
pull it in the rest of the way.
3.
When ''LOAD'' appears in the
upper display again, insert the
next disc into the slot.
4.
Repeat this until all six positions
are loaded. The system will then
begin playing the last disc loaded.
If you stop loading discs before all
six positions are filled, the system
will wait for 15 seconds, stop the load
operation, and begin playing the last
disc loaded.
To load a single disc:
1.
Press and release the LOAD
button.
2.
''NO DISC'' is shown on the screen
for an empty position in the
changer. When the green load
indicator comes on and you see
''LOAD'' in the upper display,
insert the disc into the slot. Insert
it only about halfway; the drive will
pull it in the rest of the way.
Playing Discs
You can select the position to load a
disc. Turn the interface knob to
select the position, then press
ENTER on the selector. This starts
the loading sequence. If you do not
select the position, the system loads
the disc to the first empty position in
numerical order.
If you press the LOAD button while
a disc is playing, the system will stop
playing that disc and start the
loading sequence. It will then play
the disc just loaded.
221
Advertisement
Table of Contents
