Sharp AY-X28MCJ Operation Manual page 10

Operation of remote control
Names and functions of remote control buttons
NOTE: This wireless remote control is universal and it could be used for many different
models. Some buttons on this remote control are not applicable to this model.
FAN AUTO
HUMIDITY
FILTER
TURBO
Remote control
ON/OFF
FAN
X-FAN
TURBO SLEEP
SLEEP
Sleep button
Press this button to enter sleep function or
to quit sleep function. The sleep function
will be cancelled when the unit is turned off.
There is no SLEEP function under AUTO
and FAN mode. is the icon for sleep
function.
At COOL, X-FAN mode: the SLEEP mode runs
after 1hour, the setting temp. will be increased
by 1 , 2 hour later, setting temp. will be
increased by 2 and then will run at this
setting temperature.
At HEAT mode: the SLEEP mode runs
after 1hour, the setting temp
decreased by
1 , 2 hours later
2
will be decreased by
at setting temperature.
X-FAN
Press this button to select or cancel X-FAN
mode. X-FAN off is the default setting when
the unit is switched on. If operating ON/OFF
X-FAN button and changing mode to Cool,DRY the
status of X-FAN will revert to default position.
This function is not available under the Auto
HOUR
ON/OFF
Fan and Heat mode and there is no X-FAN
symbol displayed.
MODE
LIGHT
Press this button to select LIGHT on or off
in the displayer. When the LIGHT on is
set,the icon
TIMER
indicator light in the displayer will be on.
LIGHT
When the LIGHT off is set, the icon
be displayed and the indicator light in the
displayer will be off.
will be
setting temp.
, then it will run
X-FAN button
Light button
will be displayed and the
will