Tracing A Malicious Call - Nortel 1140E User Manual

Tracing a malicious call

Use the Call Trace feature to trace nuisance calls within your system.
This feature is not enabled on all IP Phone 1140Es. Contact your system
administrator to configure this feature on your IP Phone.
To use Call Trace while on a call:
CallTrace
To use Call Trace without a Call Trace key:
Trans
or
2. Press the flashing line (DN) key. The call
waiting information appears.
If you are using another feature key, you
can use the
information associated with those
feature keys.
Press the
1. Choose one of the following:
Conf
— Press the
— Press the
2. Dial the
dial the
reconnect.
While on an active call
Display key to access
Call Trace key.
Transfer
Conference
SPRE code followed by
Call Trace FFC to automatically
soft key.
soft key.
83 or
91