Table of Contents
Advertisement
2
2 It takes about 30 seconds for the
steam to get going. Now pump the
handle a few times to prime the
pump and activate steam.
3 Mop with a forward and backward
motion to customise steam output
automatically.
S3101UKM_11_IB_ENG_120906_1.indd 7
When your Steam Mop stops
steaming, it could be out of
water. Unplug the power cord
from the electrical outlet
and refill the water tank at
anytime.
3
IMPORTANT: When your floors are
sparkling clean and you're finished
with your Steam Mop, unplug it from
the electrical outlet and carefully
remove the microfibre cleaning pad
from the mop head. Always remove
the microfibre cleaning pad from the
mop head when you have finished
using your Steam Mop to avoid
damage to your floors. The steam
will make your microfibre cleaning
pad very hot. You may want to wait
a couple of minutes to let it cool off
before you remove it.
HELP LINE: 0844 873 0728
7
12-09-06 3:27 PM
Advertisement
Table of Contents
