Mapping And Masking Luns; Test Host Bus Adapters; Lunmap Window - HP StorageWorks AB232A Installation Manual

Mapping and Masking LUNs

From the LightPulse Utility Main menu screen:
1. Choose the desired HBA.
2. Expand the category list and choose Persistent Binding.
3. Click on a target. The Lunmap button becomes active.
4. Click Lunmap. The Lunmap window displays, as shown in
Figure 3: Lunmap window

Test Host Bus Adapters

Choose this option to run host-based internal and external loopback tests on the
HBAs.
From the LightPulse Utility Main menu screen:
1. Choose Test Host Bus Adapters.
2. Enable or disable the external loopback tests:
AB232A PCI-X Host Bus Adapter Installation Guide
a. Enable the external loopback tests by choosing 1=Y. The default is
disabled, 0=No. Internal BIU PCI loopback and other loopback tests are
run automatically.
b. Choose 0=No if you do not have an external loopback connector.
Diagnostic and Configuration Utilities
Figure 3:
47