Appendix I - Specifications - Pride Mobility Quantum series Owner's Manual

A P P E N D I X
Suspension:
Drive Wheels:
Caster Wheels:
Anti-tip Wheels:
Maximum Speed:¹
Range:¹
Brakes:
Ground Clearance:²
Turning Radius:²
Overall Size:²
Drivetrain:
Batteries:³
Battery Charger:
Weight Capacity:
Component Weights:
1
Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition,
motors, controller type, tire type, and tire condition.
² Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of
(+ or – ) 3%.
³ AGM or Gel-Cell type required. See VII. "Batteries and Charging."
NOTE: All specifications subject to change without notice.
Quantum 1402
I -
SPECIFICATIONS
Active-Trac system and rear suspension
14 in. (35.5 cm), pneumatic or solid, center-mounted
8 in. (20.32 cm), solid, rear articulating
6 in. (15.24 cm), solid, front-mounted
Up to 4.5 mph (7.25 km/h) with high-torque motors (standard)
Up to 6 mph (9.65 km/h) with high-speed motors (optional)
Variable up to 25 miles (40 km)
"Intelligent Braking," electronic, regenerative disc brakes
See figure 27.
See figure 27.
Length: See figure 27.
Width: See figure 27.
Two-motor, mid-wheel
Two 12-volt deep-cycle, Group 24 batteries
NF-22 batteries for the power seat option
8-amp, off-board (standard)
5-amp, onboard (optional)
5-amp, onboard/8-amp, off-board combo (optional)
400 lbs. (181 kg) with high-torque motors
325 lbs. (147 kg) with high-speed motors
Base: 129 lbs. (58.5 kg)
Batteries: 53.5 lbs. (24 kg) each
www.quantumrehab.com
S P E C I F I C A T I O N S
43