PROLiNK WNR1012 Setup Manual

PROLiNK WNR1012 PROLiNK WNR1012 PROLiNK WNR1012 PROLiNK WNR1012 Universal Repeater Setup Guide (AP
Connect a LAN cable from any LAN port of the WNR1012 to your PC LAN Port Connect a LAN cable from any LAN port of the WNR1012 to your PC LAN Port Connect a LAN cable from any LAN port of the WNR1012 to your PC LAN Port Connect a LAN cable from any LAN port of the WNR1012 to your PC LAN Port
•
1) Open your Internet browser and access
does not pop out) and enter admin
2) If you see the Easy Setup Wizard, go to Advanced Setup. If no, skip this step.
3) Go to Configuration > Operation Mode > Select "AP Client" > Apply
4) After router reboots, go to Wireless > AP Client
Please have the following information from your main AP before proceeding.
SSID name SSID name SSID name SSID name
Wireless Channel number Wireless Channel number
Wireless Channel number Wireless Channel number
Wireless Encryption Format and Key ey ey ey Wireless Encryption Format and K
Wireless Encryption Format and K Wireless Encryption Format and K
Then enter the information, for example as shown below and click 'Apply'
5) After router reboots, go to Wireless > Basic > Under Wireless Network, change the
Frequency (Channel) to the same channel as your main AP for example Channel 11 and
click 'Apply'
Universal Repeater Setup Guide (AP Client Universal Repeater Setup Guide (AP Universal Repeater Setup Guide (AP
http://192.168.123.254
admin as username and password admin admin
Client Client Client Mode)
Version 1.1 170912
(if the Easy Setup Wizard
password password as password. password
Enter your main AP SSID
and Wireless Encryption Wireless Encryption Wireless Encryption Wireless Encryption
Format and Key Format
Format Format
If you do not know the
details, please check with
your main AP vendor first
before proceeding.
Mode) Mode) Mode)
SSID SSID SSID
Key here.
Key Key