Table of Contents
Advertisement
3 Headset Setup
3.1 Adjust the Headband
1
To adjust the headband, lengthen or shorten the band
until it fits comfortably. Position the headset receivers so
that the foam cushions sit comfortably over the center of
your ears.
2
On the WH300, position the stabilizer T-bar above
your ear.
3
For a tighter fit, gently pull the opposite ends of
the headset inward as shown.
1
2
3
3.2 Adjust the Mouthpiece
1
1
Carefully bend and shape the boom with both
hands as shown. Avoid bending or twisting the boom
near the microphone or earpiece.
2
Position the click-stop turret and boom so that the
microphone is two finger-widths from the corner
of your mouth.
3
Make sure the front of the microphone faces your
2"
mouth. If necessary, twist the microphone slightly so it's
50.8 mm
in the proper position. Do not use forceful twisting motions
2
or try to turn the microphone completely around.
3
Plantronics Savi User Guide
1
2
3
front back
Assembling Base
1
Separate the top from the bottom of the charger base.
2
Attach the base stabilizer to the base, then re-attach the
top.
NOTE
This product has a replaceable battery. Use only
the battery type supplied by Plantronics.
2"
50.8 mm
6
Hide quick links:
Advertisement
Table of Contents
