Troubleshooting - Philips 107E61/00 Service Manual

14 107E6 CRT
Go to cover page
Having this problem?
No Picture
(Power LED not lit)
No Picture
(Power LED is flashing green)
No Picture
(Power LED is green)
Screen doesn't show
when you turn on the monitor
No color or intermittent color
Color appears blotchy
Missing one or more colors
Dim Picture
Picture is too large or too
small.
Edges of the picture are not
square.
Picture has a double image.
Picture is not sharp.
Problem with On Screen
Display
Unstable Picture
Trouble shooting
Check these items
Make sure the Power cable is plugged into the power outlet and back of the monitor.
Power button on the front of your monitor should be in the ON position.
Disconnect the monitor from the power outlet for about one minute.
Make sure the computer is turned on.
Make sure the monitor cable is properly connected to your computer.
Check to see if the monitor cable has bent pins.
The Energy Saving feature may be activated
Make sure the Brightness and Contrast controls are set correctly.
Make sure the monitor cable is properly connected to your computer.
Check to see if the monitor cable has bent pins.
Make sure the computer Power button is on.
Make sure the monitor cable is properly connected to your computer. (Also refer to
the Quick Start Guide).
Check to see if the monitor cable has bent pins.
Make sure the computer is turned on.
If you are using a non-VESA-DDC standard video card, turn the DDC1 / 2B feature
Off.
The picture may need degaussing.
Remove any nearby magnetic objects.
Face the monitor toward the East for the best picture quality.
Check the Color Temperature.
Make sure the monitor cable is properly connected to your computer.
Check to see if the monitor cable has bent pins.
Adjust the Brightness and Contrast controls.
Check your video card and it's owner's manual instructions for it may be a
non-VESA-DDC Standard card.
Adjust the Horizontal and/or Vertical Size.
Adjust the Zoom.
Adjust the geometry.
Eliminate the use of a video extension cable and/or video switch box.
Face the monitor toward the East for the best picture quality.
Check to make sure Moiré is switched off.
Morie
Adjust Sync Input.
Refer to the instructions and troubleshooting information in that chapter.
Increase your refresh rate.