Recording User Presets For The Equalizer; Changing The Equalizer Mode - Fujitsu CD5425 Owner's Manual

Basic operation
[AUDIO CONTROL] button

Recording user presets for the equalizer

The adjustment values for BASS, MIDDLE and TREBLE settings made in
the audio control mode can be stored. The stored adjustment values can be
called by changing the equalizer mode. For detail, see "Changing the
equalizer mode" on page 32.
Press the [AUDIO CONTROL] button for more than one
second.
The adjusted values are stored.

Changing the equalizer mode

EQ (equalizer) mode can be used to adjust the frequency of the audio
channels being played back in accordance with the genre and instruments
of the music being played. Apart from four equalizer modes, this deck offers
the audio adjustment mode in which you can record set BASS, MIDDLE,
and TREBLE adjustment values, and the CUSTOM MODE in which and you
can apply these adjustment values.
Press the [SOUND] button for less than one second.
Pressing this button cycles you through the equalizer modes in the
following order.
DEFEAT (equalizer OFF)
POWER (bass tones emphasized)
SHARP (high tones emphasized)
VOCAL (mid tones emphasized)
CUSTOM (memorized user-preset values for the equalizer)
[SOUND] button
32