Changing The Area Shot Mode - Fujitsu CD5425 Owner's Manual

[MUTE] button

Changing the AREA SHOT mode

Press the [MUTE] button for more than one second.
The AREA SHOT mode is activated. Information such as
intersection street names and the direction of turns are displayed in
text and with arrows.
Pressing and holding the [MUTE] button a second time, closes the
AREA SHOT mode.
● If buttons other than [
● When resuming the AREA SHOT mode after it has been
● Make sure to follow the actual traffic regulations when driving.
● Driving your vehicle while only following guidance point
● Do not modify this system for use other than that specified herein.
audio screen will be displayed and the audio system can be
operated. If the audio system is not operated within 6 seconds,
the system will return to the AREA SHOT screen.
cancelled, the most recently used data will be displayed.
instructions may lead to traffic violations and cause accidents.
Also, do not deviate from the installation procedures described
herein, ECLIPSE will not be held liable for damages including, but
not limited to serious injury, death or property damage resulting
from installations that enable unintended operation.
How to operate the AREA SHOT function (U.S.A. only)
], [ ], [DISP], [MUTE] are pushed, the
73